Conventional Type (WRC)

Welding Rotators
Conventional Type (WRC)

WRC Rotator consists of 1 drive unit and 1 idler unit with a pendant-type control panel. The rollers are either made of steel or polyurethane (PU) coated per customer’s requirement. The base frames are fabricated and machined. The roller housing is bolted over the base frame. Both the roller housings have to be manually moved as per the job diameter, keeping the center fixed. For step less speed variation, AC VFD (Variable Frequency Drive) drive system is used. Dual drive arrangement synchronizes with single variable drive with interlocking.

Technical Specifications

MODEL ROTATING CAPACITY (METRIC TONNES) LOAD CAPACITY (METRIC TONNES) ROLLER SURFACE SPEED(MM/MIN) JOB DIAMETER RANGE (MM) ROLLER SIZE (MM) ROLLER TYPE
DRIVE UNIT IDLER UNIT DIAMETER WIDTH
WRC-1 1 0.5 0.5 100-1000 200-1500 150 50 PU COATED
WRC-2 2 1 1 100-1000 200-1500 150 50
WRC-3 3 1.5 1.5 100-1000 200-3000 200 50
WRC-5 5 2.5 2.5 100-1000 200-3000 250 50
WRC-10 10 5 5 100-1000 200-4000 300 100
WRC-15 15 7.5 7.5 100-1000 200-4000 300 125
WRC-20 20 10 10 100-1000 400-5000 400 125
WRC-25 25 12.5 12.5 100-1000 400-5000 400 150
WRC-30 30 15 15 100-1000 400-5000 400 150
WRC-40 40 20 20 100-1000 400-5000 400 200
WRC-50 50 25 25 100-1000 400-5000 400 250
WRC-60 60 30 30 100-1000 400-5000 550 250
WRC-70 70 35 35 100-1000 400-5000 550 300
WRC-80 80 40 40 100-1000 400-5000 550 300
WRC-100 100 50 50 100-1000 400-6000 550 350
WRC-120 120 60 60 100-1000 400-6000 550 400
WRC-150 150 75 75 100-1000 400-6000 600 150 STEEL
WRC-200 200 100 100 100-1000 400-6000 600 200
WRC-250 250 125 125 100-1000 400-6000 700 200
WRC-300 300 150 150 100-1000 400-6000 700 200